Sound Installation/Pollution Resistant PE/PVDF/FEVE/UL Certified Aluminum Composite Panel

Model Number: Signage high gloss finish-#17033 Brand Name: ALUWEDO Key Specifications/Special Features: Aluwedo sign panels are comprised of a recycled thermoplastic core sandwiched between two sheets of aluminumThey are very lightweight, durable and resist moistureThese panels offer flat, smooth surface that accept most digital inks, paints and vinyl graphicsLightweight and durableSuitable to mount graphicsDigitally printable with most inksMoisture resistant5-year limited warrantyWe look forward to offering these products for your sign panel, printing and channel letter backing needsPanel specifications and dimensions:
Thickness: 2mm (0.08”), 3mm (0.12”) 4mm (0.16”) 5mm (0.2”) 6mm(0.24”)
Thickness recommended: 4mm (0.16”)
Width: 850mm to 2000mm, (34” to 80” )
Recommended: 1220mm(48.8”), 1250mm(50”), 1500mm (60”), 2000mm (80”)
Panel lengthas required
Aluminum thickness: 0.3mm (0.012”) to 0.5mm(0.02”)
*Custom width and length available upon request subject to minimum quantities

Recommendeddimensions:
1220mm (4ft)*2440mm (8ft)*3mm ( 0.12”)*0.21mm (0.08”)
1500mm (5ft)*3050mm (10ft)*3mm ( 0.12”)*0.21mm (0.08”)

Aluwedo features:
Ultra modern look and excellent flatness can be shaped and formed without any loss of surface integrity

1. Lightweight-reduces both frame loading and cost of fabrication and installation
2. Sound installation and pollution resistant
3. Acid, alkali and salt spray resistant
4. Smooth paint finish and stability of fitness
5. Excellent UV characteristics-retains colour after long exposure
6. Resistant to blow and breakage-high impact resistance
7. High-temperature roll coating from PPG, Becker, Nippon
8. Fabrication:
   

Sawing:- with vertical panel saw, circular, compass or first saw
Drilling holes for joining:- with drill bits for aluminum sheet and plastic panels (for larger holes use a drill bit with locating point)
Routing:- with conventional routing equipment, to avoid pressure marks, please use plastic or wood vice jaws when chucking the work places
Shearing:- with a guillotine (check correct insertion of top cover sheet)
Blanking tools to be padded
Bending:- with folding table min
Inside bending radius r= 15*T (T=panel thickness) spring-beck effect higher than with solid sheet
Screwing:- with conventional stainless wooden, sheet metal and metal screws
For outdoor use, please take panel expansion into account
Folding (routing technique):- manually after routing V-groove on reverse side using panel saw with milling attachment or a hand milling cutter